Aravali fence is the Authorised reseller of RADIOBARRIER systems from Polus-ST, Russia in the Middle East region
Detects Human & Vehicle movement up to 200 meters radius and seismic vibrations 10-15 meters deep.
Detects intrusion based on change in electromagnetic field
Detects personnel or vehicles by processing thermal data
Previous
Next

THE RADIOBARRIER SYSTEM

The Radiobarrier System


The RADIOBARRIER system consists of seismic, microwave,passive IR sensors used for intruder detection and classification; TV and thermal sensors – for their identification.For installation, remote configuration, monitoring and control of the system, either handheld or desktop receivers are used.The sensors communicate to the monitoring and control station wirelessly.

features

Mesh Network

RADIOBARRIER implies wireless communication between all system components, so that all the detection devices function as communication nodes in a mesh network.

Low Battery Consumption

RADIOBARRIER detection devices operate on different types of batteries and accumulators that ensure up to a 5 year mission life.

Reliability

A secure two way radio channel provides full control of the system remotely, transmits alarm data to an unlimited distance with guaranteed delivery

Ergonomic Design

RADIOBARRIER can be deployed in a few hours due to light weight and small size of the devices and simplicity of their installation. A variety of configurations and detection principles make the system flexible and suitable for a wide range of applications

High Performance

RADIOBARRIER detection devices feature unrivalled detection range and field-proven technology, This IP-rated equipment can be installed covertly on any terrain, in all weather conditions.

Integration

RADIOBARRIER can be used as a standalone security solution based on open standards (UHF 433) with the set of software programs providing full control over the system. However, the system can be utilized as the first layer of defence in complete security systems via TCP/IP and GSM protocols or any command and control software at your site.

sensors

SEISMIC SENSORS

RS-U MULTI-SENSOR

RS-U detects intrusion of personal or vehicles by processing seismic data. Powered by an external battery.

RS-U_transparent (1)

FEATURES

Operating modes selective or simultaneous 

  • Seismic Sensor
  • Break-wire sensor
  • Autonomous repeater
  • Network controller

RS-N DIRECTIONAL MULTISENSOR

RS-N detects, locates, and displays the direction of movement of personnel or vehicles by processing seismic data. Powered by an external battery.

RS-N_transparent

FEATURES

Operating modes selective or simultaneous 

  • Directional Seismic Sensor

RS-U v2.0 MULTI-SENSOR

RS-U v2.0 is a compact version of the RS-U Multi-Sensor designed for special operations. Powered by an inbuilt rechargeable battery.

RS-U v.2_transparent

FEATURES

Operating modes selective or simultaneous 

  • Seismic Sensor
  • Break-wire sensor
  • Autonomous repeater
  • Network controller

MICROWAVE SENSORS

RS-L MICROWAVE SENSOR

RS-L Sensor consists of a receiver (PRM and a transmitter (PRD). It detects personnel or vehicles by processing the variations in the electromagnetic field between the PRM and the PRD.

Powered by an external battery.

RS-L_transparent (1)

FEATURES

Operating modes selective or simultaneous 

  • Microwave Sensor
  • Break-wire sensor
  • Two versions available:
  • with the range up to 100m and up to 200m

RS-L /433-EX MICROWAVE SENSOR

RS-L/433-Ex detects a foot-born intruder by processing the variations in the electromagnetic field. Consists of two units  (a receiver/ a transmitter) and is used for securing the enclosures of welded wire fencing. Powered by an external battery.

FEATURES

Operating modes selective or simultaneous 

  • Explosion-proof housing
  • Underground installation
  • Set can be increased up to 3 sensors to cover a larger area

INFRARED SENSORS

INFRARED SENSORS

RS-IK detects personnel or vehicles by processing thermal data.

Powered by an external battery.

RS-IK_transparent (1)

FEATURES

Operating modes selective or simultaneous 

  • Passive infra-red sensor
  • Allows establishing a perimeter with a narrow detection zone

Applications

SENSOR Specifications

SensorCommunication RangeDetection RangeOperation TimeOperating Temperature RangeIP ratingWeightDimensions
RS-U Multisensorup to 15km

Personnel – up to 100m

Vehicle – up to 200m

up to 5 yearsfrom -40°C to 50°CIP680.65kg140x80x70mm
RS-U v2.0 Multisensorup to 15km

Personnel – up to 100m

Vehicle – up to 200m

up to 5 yearsfrom -40°C to 50°CIP680.55kg110x95x85mm
RS-N Directional Multisensorup to 15km

Personnel – up to 100m

Vehicle – up to 200m

up to 5 yearsfrom -40°C to 50°CIP680.9kg140x150x90mm
RS-IK Infra-Red Sensorup to 15km

Personnel – up to 50m

Vehicle – up to 100m

Horizontal Angle – 5°

Vertical Angle – 2.4°

up to 3 yearsfrom -40°C to 50°CIP650.5kg175x100x70mm

RS-L

Microwave

Sensor
up to 15km

up to 100m

up to 200m

(depends on the version)
up to 3 yearsfrom -40°C to 50°CIP68

PRD – 0.7kg

PRM –

0.8kg

PRD –

185x140x50mm

PRM –

200x140x50mm

RS-L/433-EX Microwave Sensor

up to 15km

Detection zone

Max. length : 12m

Height : 1.6m

Width : 6m
up to 3 yearsfrom -40°C to 50°CIP653.65kg260x250x80mm

 CCTV SUBSYSTEMS

RS-TV SENSOR

RS-TV provides autonomous video surveillance in any weather and any time of day. Equipped with an IR illumination for low light conditions. The video feed is transmitted via radio network and can be processed by the PTV Portable receiver or by the RADIOBARRIER Operator’s Console. The broadcast can be engaged manually or triggered by the RADIOBARRIER sensor alarm.

RSTV_transparent

FEATURES

  • Angle of view:
  • Horizontal: 20.0°
  • Vertical: 12.50°

RS-TP THERMAL IMAGING SENSOR

RS-TP captures a thermal image in any weather and any time of day and transmits via  radio network. The feed  can be processed by the PTV Portable receiver or by the RADIOBARRIER Operator’s console. The broadcast can be engaged manually or triggered by the RADIOBARRIER sensor alarm.

 

РС-ТП

FEATURES

  • Black & white halftone image
  • Angle of view:
  • Horizontal: 20.0°
  • Vertical: 17.0°

PTV PORTABLE TV RECEIVER

 PTV receives a video signal from RS-TV, RS-TP or a TV Repeater (TV-R). PTV is used to provide visual control over the monitored area and to adjust CCTV subsystem devices.

 

 

FEATURES

  • Built-in battery
  • Black & white half-tone LCD

Specifications

SensorCommunication RangeDetection RangeOperation TimeOperating Temperature RangeIP ratingWeightDimensions
RS-TV Sensorup to 20km

up to 100m

up to 6 months

(ext. battery)
from -40°C to 50°CIP672 kg185x140x65mm

RS-TP Thermal

Imaging Sensor
up to 20km

up to 100m

up to 6 months

(ext. battery)
from -40°C to 50°CIP672 kg250x90x75mm

PTV Portable

TV Receiver
up to 20km

up to 3 months

(built battery)
from -40°C to 50°CIP530.9 kg220x110x50mm

COMMAND & CONTROL

RADIOBARRIER OPERATOR’S CONSOLE WITH << GIS RADIOBARRIER >> CONTROL SOFTWARE

OPERATOR’S CONSOLE is a desktop portable PC with the preinstalled <> command and control software, and networks, display alarm and service information on a digital map, receive video from the RADIOBARRIER CCTVv subsystem and perform the integration with other security systems.

 

 

 

 

MPO+UI_transparent (1)

SYSTEM REQUIREMENTS:

Operating modes selective or simultaneous 

  • OS Windows XP SP3, Windows Vista,Windows 7, Windows 8, Windows 10
  • CPU speed of 1.6 GHz or higher;
  • 1 GB of RAM
  • DirectX 9 adapter;
  • 500 MB of hard drive space

RS-L /433-EX MICROWAVE SENSOR

KOPR is used to manage RADIOBARRIER system devices, namely:

  • Set up and configure sensors
  • Register sensor’s GPS coordinates during installation and locate when retrieving
  • Monitor status of the RADIOBARRIER detection devices .
  • Receive and display alarm and services messages
  • Control several networks
  • Determine GNSS coordinates
KOPR_transparent (1)

SYSTEM REQUIREMENTS:

Operating modes selective or simultaneous 

  • Upto 3 days with an inbuilt rechargeable battery
  • GPS/GNSS receiver
  • Upto 1 Km communication range
  • Operating temperature range from : -10°C to +50°C
  • IP rating: IP53
  • Weight: 0.7 kg
  • Dimensions: 210x95x45 mm

SOFTWARE

The GIS Radiobarrier is a command and control software for the RADIOBARRIER Wireless Intrusion Detection System. This special software solution is designed to provide complete situation awareness in the monitored area.

The software processes data from deployed sensors, displays their status, controls their operation mode and informs the operator of alarm situations within the monitored area (by sound signals, text messages, color and configuration of displayed icons, video image).

Highlights

  • complete situation awareness
  • high reliability
  • operation with unlimited number of networks
  • flexible integration with external security systems using WinSock protocol
  • clear graphical visualisation

System Requirements

  • OS Windows XP SP3, Windows Vista, Windows 7, Windows 8;
  • CPU speed of 1.6 GHz or higher;
  • 1 GB of RAM;
  • DirectX 9 adapter;
  • 500 MB of hard drive space.